Universal Edge Beveller type UKF

Our Universal Edge and Bevelling Machines are equipped with a rigid machine table and with powerful clamps to fix the work pieces on the table. Parts in a large variety of shapes or sizes can be processed on these machines. Of course within a processing cycle the material must have the same thickness and the same bevel geometry.

The oscillating Grinding Belt Unit is moving along the table and is grinding the bevel or straight edge from the solid material. After each pass the unit returns in rapid traverse mode back to the start position.

Application Ranges:

Steel-Service-Centers
Heavy Machinery Manufacturing
Vehicle and other Transportation Equipment
Crane Production, Lifting and Rigging Equipment
Construction and Farm Equipment
Ship Building

Technical Datas:

Mashine table length:	3000, 6000, 9000 and 12000 mm
Workpiece thickness:	3 - 100 mm
Workpiece dimensions:	min. 80 x 80 mm, max. 1500 mm x Table length
Removal rate:	100 - 160 cm³/min depending on the steel quality
Bevel anglel:	85° up side bevel to -45° down side bevel
Controller:	SIMATIC S7